Robomow Installation Kit M (100 Meter Perimeter Wire and 150 Wire Pegs)

This Robomow Installation Kit S is an installation kit with a roll of 100 m cable and 150 wire pins. This installation kit is sufficient for 400 m2 lawn and is suitable for the Robomow mower. Do you already have perimeter wire but are moving house? Or do you want to expand the Robomow's cutting area? Then use this installation set.

Instructions
You can install perimeter wire either above or below ground. If you lay the perimeter wire underground, it can be up to 5 cm deep for most Robomow robotic mowers. To do this, dig a trench where the wire will be laid. If you want to lay the wire above ground, you will need wire pegs. These are special pegs to fix the wire in the ground. The wire needs to be secured every 50 centimetres with a peg. This prevents the wire from shifting.

Specifications

• Article number: 122-001-603;
• Type: for all Robomow models;
• Implementation: Extension / installation kit;
• Contents: 100 m perimeter wire, 150 wire pins.