Milwaukee MC110 pH Monitor

The Milwaukee MC110 Monitor is designed to constantly measure and check the pH level. The MC110 has a user selectable setpoint, if the measured value differs from the setpoint a red LED will light up to alarm you. The MC110 is ideal for the monitoring of a swimming pool, aquarium or nutrient tank.

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

Features

• Professional pH monitor especially designed for use with aquariums;
• User selectable Hi/Low Set Point;
• Manual 2 points calibration;
• Visual LED alarm;
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution;
• Double junction pH electrode with 2m cable (BNC connector).

Specifications

• pH Range: 0.0 - 14.0 pH;
• pH Resolution: 0.1 pH;
• pH Accuracy: ± 0.2 pH;
• Calibration: Manual 2 points;
• Setpoint range: 3.5 to 7.5 pH;
• Alarm: Active when reading is higher or lower than set point;
• pH Electrode: MA911B/2 (included);
• Environment: 0 to 50 oC / 32 to 122 oF; max RH 95%;
• Power Supply: 12 VDC adapter (included);
• Dimensions: 148,5 x 82,5 x 32 mm;
• Weight: 160 g.