Milwaukee MC310 EC Monitor

The Milwaukee MC310 Conductivity Monitor is designed to constantly measure and check the EC level. The MC310 has a user selectable setpoint, if the measured value differs from the setpoint a red LED will light up to alarm you. The MC310 is ideal for the monitoring of a swimming pool, aquarium or nutrient tank.

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

Features

• Professional conductivity (EC) monitor especially designed for use with aquariums;
• User selectable Hi/Low Set Point;
• Manual single point calibration;
• Visual LED alarm;
• Supplied with 12 VDC adapter, mounting kit, and 20ml 1413µS/cm calibration solution;
• MA812/2 EC Conductivity probe with 2 metres of cable and a BNC connector.

Specifications

• EC Range: 0.0 - 10.0 mS;
• EC Resolution: 0.1 mS/cm;
• EC Accuracy: ±2% Full Scale;
• Calibration: Manual single point;
• Setpoint range: 1 - 5 mS;
• Alarm: Active when reading is higher or lower than set point;
• Conductivity probe: MA812/2 (included);
• Environment: 0 to 50 oC / 32 to 122 oF; max RH 95%;
• Power Supply: 12 VDC adapter (included);
• Dimensions: 148,5 x 82,5 x 32 mm (meter only);
• Weight: 180 g (meter only).