Hozelock Cyprio Aquaforce 3500 (Pond and Solids Handling Pump)

The Hozelock Cyprio Aquaforce 3500 is a powerful solids handling pump for transporting dirt particles from the pond to a pond filter or for feeding a waterfall or watercourse. This filter pump is able to process larger dirt particles up to a maximum of 6 mm. The Aquaforce 3500 has a maximum flow of 3,500 liters per hour, a maximum delivery height of 250 cm and a power of 50 watts. Using the supplied hose connections, a pond hose with a hose diameter of Ø 20/25/32 or 40 mm can easily be connected to the pump.

Characteristics:

• Solids handling pump for filtration, waterfalls and watercourses
• Fish protection system prevents small fish from accessing the pump
• Large cage surface area reduces cage clogging and improves water purity

Technical data:

• Pump power 50W / 230V
• Maximum flow rate 3500 lph liters / hour
• Maximum delivery height 2.5m
• Inlet / outlet size 25mm- 40mm
• Cable length 10m

The Aquaforce sets high performance and efficiency benchmarks in flow rates and head heights. The range of Aquaforce filter and waterfall pumps have been developed to be tough, trouble free and efficient.

Self Cooling System
The motors feature a water-cooling system, which ensures that the pumps are kept at a constant temperature and reduce the risk of overheating.

Ceramic Bearings
Ceramic bearing maximise pump life and along with thrust washers ensure the motors are ultra reliable.

Fish Protection System
All Aquaforce pumps include a removable Fish Protection System that allows you to reduce the inlet from 6mm/10mm to 2mm, to prevent fish getting into the cage.

Conical Impeller
A conical impeller maximises performance.

Carry Handle
Aquaforcepumps are equipped with an integral carrying handle for easy lifting in and out of the pond.

How does Aquaforce work?

Pond water is drawn in through the cage grill which filters out coarse solids up to 6mm/10mm in size (dependent on model). Smaller particles down to 2mm in size can be eliminated by fitting the supplied clip-in fine mesh filter tray which affords the best possible protection for pond fish, preventing them from accessing the pump. The Aquaforce has a considerably increased cage surface area, which allows the maximum amount of waste to be collected and pumped to the filter system. It also means that the cage is far less likely to clog, which will save you from constant cleaning.

Most common Aquaforce set up:

The Aquaforce pumps are particularly suitable for pumping water to external filters or for use in high flow waterfalls or watercourse applications where low maintenance is important.

For the best results, the pump should be positioned in the deepest part of the pond at least 200mm under the surface. This will ensure the best circulation of water in the pond. When being used as a filtration pump, its solids handling capability will be maximised.

The larger models (6000, 8000, 12000 & 15000) feature a second inlet and flow control. The second inlet allows the use of a skimmer or satellite filter and the flow control allows the adjustment of the flow of water to a waterfall or filter. It also allows the control of the amount of water being drawn from the second inlet.

If a skimmer is used to pump surface debris to the filter, the flow control will adjust the balance of water taken from the main cage and the skimmer.

The larger Aquaforces are also able to operate amphibiously, which gives the option to operate the pump on dry land while the cage remains submerged.

Alternatively, a second filter can be attached and sited in a ‘dead’ area of the pond if there is one, or in an adjacent smaller pond.

EAN: 5010646058223
SKU: 1587 1240