GARLAND WATER BUTT LINKING KIT

Easily connect two water tanks together for increased water storage capacity. The connection system can be connected at the bottom, then the two water tanks will fill at the same rate. If connected at the top, the first water tank will fill up and then overflow into the second.

Instructions for use

• Before drilling, make sure both water tanks are facing each other with the taps on the front.
• The water tanks to be connected must be on a flat surface and no more than 39cm apart. The connecting system can be connected at the bottom, then the two water barrels will fill at the same rate. If they are connected at the top, the first water tank will fill up and then overflow into the second.
• Drill a 25 mm diameter hole about 25 cm from the top or bottom in the opposite sides of the water tanks to be connected.
• Connect the water pipes with the supplied hose. Push the connecting piece through the washer on the inside of each water pipe, then insert and tighten the nut on the outside to form a seal.

Specifications

• Artikelnummer Garland: W1871;
• Set bestaat uit: 1 x 500 mm verbindingsslang, 2 x 20 mm schroefkoppelingen, 2 x sluitringen, 2 x moeren.