Carbonactive Lightweight Carbon Filter CA650Z160 650m³ Flange Ø160mm

CarbonActive filters are ideal for ventilation and air conditioning systems. They eliminate any unwanted odors or pollutants from the air. Thanks to their innovative structure, CarbonActive filters are lighter, smaller, more efficient, and safer than conventional activated carbon filter alternatives. The multilayer fleece mats seal the bottom and the flange (made of recycled plastic) which prevents unfiltered air from entering.

Specifications:

• Weight: 3 kg
• Capacity: 650 m3
• Diameter: Ø275mm
• Height: 330mm
• Connection: Ø160mm

Each filter comes with a special pre-filter to trap dust. Velcro allows the pre-filter to be easily replaced after about 2 months of use, depending on usage. The recommended fan capacity is 400m3 air displacement and a minimum of 300m3.

Operation of CarbonActive Carbon Filter
Activated carbon is a micro-porous form of carbon produced from peat, wood, brown coal, or hard coal. Activation is done by steam or by a chemical process. This activation process occurs at countless pores in a molecular structure (macro-, meso-, micro-pores). Through the carbon pores, carbon greatly increases its absorption capacity. This capacity enlargement can be up to 1200m2/g activated carbon. The carbon filter, with the revolutionary new technique, uses less carbon in reduced form to filter more precisely. Smaller carbon particles (0.4 to 0.8mm) are optimally utilized compared to conventional carbon particles (3 to 4mm). By splitting the carbon into small parts, the absorption capacity is increased, and the weight is reduced. This also extends the lifespan.

CarbonActive Filter Cloth - Prefilter Cover
The filter covers on CarbonActive filters are not like conventional covers on the market. The cover consists of 2 parts, namely a coarse dust part and a part for finer dust. The designation for the density of our filter cover is G3-F6 coarse/fine dust filter. To give an example, the Can filter has an F3 filter cover, indicating that the cover is coarser and therefore allows fine dust to pass through easily. The CarbonActive covers also filter finer dust due to a higher density of the filter. The second part of the cover is the G3 part, intended for coarser dust particles. After that, the filtration of the odor takes place in the part with the 4 layers of carbon. If the pre-filter cover is saturated (you can see it from the dirt/blackness of the fabric), no/less odor will pass through the filter, and you need to replace the cover. We recommend replacing the cover after 10 to 15 weeks. Without a cover, the filter will get clogged with dust, which adversely affects the filter's service life. Always make sure to have a filter cover for your filter. The covers are there to filter out excess dust from your space.

Special Pre-filter Cloth:

• binds all coarse particles larger than 0.0004mm (0.4µm), extending the lifespan,
• Velcro on the prefilter cloth allows for easy replacement without disassembling the filter,
• Carbon Active filter covers are available for all sizes of Carbon Active filters.