Bubbleator B-Quick 2 Filters Set (220µm and 70µm)

The original Bubbleator B-Quick from The Pollinator Company has a capacity of 350 grams of plant material and is designed for frequent use and a quick process. Within 10 minutes you will have your first crystals! The set comes with 2 bags: 220 and 70 microns.

The B-Quick is delivered as a complete system. It is compact and discreet, lightweight, and easy to transport thanks to the built-in handles.

Included accessories:

• thermometer;
• Pyramid / cylinder bag 220µm;
• Small Ice-O-Lator filter bag 220µm;
• Small Ice-O-Lator crystal collection bag 70µm.

Extraction
For the extraction, in addition to the Bubbleator, you will need a bucket with a diameter of 30 cm, absorbent kitchen paper, and 2 kg of ice cubes.

Easy to use, you need to freeze the plant material before proceeding with the extraction. For successful results, the water must reach a temperature of 4°C.

Extraction procedure:

1. Fill the Bubbleator with cold water and ice, mix well, and check the temperature (4 °C).
2. Take the bags and place them inside each other, starting with the one with the finest filter and ending with the one with the coarsest filter, and place the frozen material inside (maximum 500 g).
3. Place the bags in the Bubbleator for 3-8 minutes.
4. Take them out and wring out the excess water.
5. Separate the 1st bag, which will contain waste.
6. Separate the second bag and keep the third, which will contain the resin.
7. Wrap it in rolling paper to remove moisture.
8. Place the obtained resin in the metal sieve and press it with a spoon so that it falls onto a piece of kitchen paper that was previously placed under the sieve.
9. Spread the resin over the paper and let it dry for at least 48 hours at room temperature.