Milwaukee MW101 pH Meter for Soil

Milwaukee MW101 Meter + MA920 Probe - for pH in Soil Testing. The Milwaukee MW101 pH Soil Tester is a complete kit to measure the pH level in soil. This set consists of a Milwaukee MW101 pH meter with a resolution of 0.01p pH and aMilwaukee MA920/B1 for measuring pH in growing mediums and/or foodstuffs.

MW101 Standard Portable pH Meter with 0.01 pH resolution

Standard portable meters with no frills! Milwaukee’s durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation. The meter is supplied with pH electrode and calibration solutions.

Specifications MW101 pH tester:

• pH Range 0.00 to 14.00 pH;
• pH Resolution 0.01 pH;
• pH Accuracy ±0.02 pH;
• Temperature Compensation manual, 0 to 50°C;
• Calibration manual, in 2 points;
• through offset and slope trimmers;
• Environment 0 to 50°C / 32 to 122°F; max RH 95%;
• Battery Type 1 x 9V (included);
• Battery Life approx. 300 hours of continuous use;
• Dimensions 145 x 80 x 40 mm;
• Weight 220 g (with battery).

Milwaukee MA920B/1 pH electrode for growing mediums and foodstuffs:

• Measuring range: 0 to 12 pH;
• BNC Connector;
• Conical tip for easy maintenance;
• Ideal for liquids;
• 120mm long & 12 mm wide.

Specifications:

• Measuring Range 0 to 12 pH;
• Temperature Range -5 to 100°C (23 to 212°F);
• Shaft Material PVDF (Polyvinylidene fluoride);
• Reference Electrolyte KCl 3.5M + AgCl;
• Reference Junction Ceramic, triple;
• Reference Type single, Ag/AgCl;
• Shape of membrane conic;
• Connector Type BNC;
• Max pressure 0.1 bar;
• Cable length Coaxial, 1 meters;
• Shaft length 120mm;
• Diameter 12 mm;
• Application Laboratory Applications.

How does one take soil pH measurements with the Milwaukee MA918B/1 soil pH probe?
pH Soil testing with the Milwaukee MA918B/1 soil pH probe is very easy. You just stick it in the soil and you can read the pH value instantly.

How does one take soil pH measurements with a pH meter for lquids?
Use a soil to water ratio, of 2 parts soil and 1 part bottled drinking water. Pack soil in cup, and always use a flat bottom measuring cup to assure proper proportions, then add the water. Stir or shake the soil and water mixture vigorously, then let sit for 1 to 2 minutes. Turn on your pH meter and be sure you have calibrated your meter before running the test, remove the cap to expose the sensor, and dip the sensor completely in the solution. Move the probe in the mix to be assured of good water to probe contact, and record the reading displayed on the meter.